V3 Transmission Line Monitoring System
V3 Transmission Line Monitoring System
LineVision
LineVision’s new generation of overhead line monitoring technologies provides utilities with unprecedented visibility and accuracy on critical parameters for use across multiple utility departments.
Module Outputs:
- Conductor sag and vertical clearance from ground for each individual phase
- Horizontal conductor displacement/blowout for each individual phase
- Conductor tension
- Conductor temperature
- Circuit current
- MW, MVAR, MVA and Power Factor
- Icing alerts
- Galloping alerts
- Local ambient weather conditions
- Anomalous motion alerts
- User configurable alert notifications
LineAware® Situational Awareness for Operational Safety
Help prevent fires and damage caused by excessive conductor sag and blowout in and near your rights-of-way by continuously monitoring the position of your conductors to confirm they are performing within their acceptable operating limits.
Elevate your Risk Management Strategy knowing you have verified historical data for line clearances that can be leveraged if called upon for reporting.
Give your operators real-time situational awareness with measured clearances and horizontal motions, triggering real-time alerts on exceedances to allow for corrective action to protect asset health, system reliability and public safety. Corrective action can include preemptively switching line loading and triggering an inspection or maintenance action.
LineRate® Dynamic Line Ratings
Reliably increase the capacity on existing lines by 15-40% with Forecasted Line Ratings and Real-Time Dynamic Line Ratings (DLR).
Forecasted Line Ratings with customizable confidence intervals can be utilized in the Day-Ahead Markets & Operations to provide extra capacity to reduce congestion/curtailments, integrate additional renewable resources and increase market efficiency.
Forecasted Line Ratings are validated in real-time by field measurements and are being continually improved by machine learning algorithms that tune the Forecasted Line Rating with the historically predicted rating and the sensor based historical as-measured rating.
Module Outputs:
- Dynamic Line Rating (DLR)
- Dynamic short-term emergency ratings (STE), in a time-configurable manner
- Forecasted line ratings for hourly, 2-hour, 4-hour, 24-hour or other periods as specified
LineHealth® Asset Health Monitoring
Improve your Overhead Line Planning and Maintenance strategies by prioritizing the repair and replacement of lines that are most critical based on the module’s estimation of remaining conductor life.
The Asset Health Module creates an asset digital twin, integrating both historical and real-time data from the target overhead line to compute conductor baseline health from LineVision system data.
Integrating line design engineering specifications, information obtained after a line is built, and real-time field measurements the module delivers an assessment of actual conductor condition, analysis of factors/events which contributed to loss of strength, and projected remaining asset life.
Module Outputs:
- Analysis of historical high temperature exposure and sag
- Remaining tensile strength
- Projected conductor end of life
- Engineering designed sag vs actual post creep sag assessment
- Galloping event: Amplitude and maximum tension experienced
- Icing events: Ice weight accumulation and maximum tension experienced
- Recommended revised safe operating limits
Key Features
Other Products
TOR-1
Transformer Oil Express Test Kit TOR detects moisture in oil quickly and precisely – even in miniscule quantities.
Express test kits have been developed specifically to detect the amount of moisture in dielectric insulation oils, which is necessary for normal operation and timely maintenance of electric equipment. The high precision and excellent long-term stability make this testing device an ideal solution for continuous monitoring of moisture in transformer oils.
The test kit is compact, reliable, simple to operate and multifunctional; it is the best choice for moisture measurement. The device also measures such parameters as water activity (aw), temperature (t), and calculates absolute water content in ppm. The device combines everything necessary for simple and comfortable operation: two digital displays to indicate sample temperature moisture content in ppm, a detachable sample container and two buttons: power and measurement.
TOR-80
The TOR-80 unit is designed to determine the electric breakdown voltage of transformer oil and other liquid dielectrics in accordance with IEC 60156, ASTM D877, ASTM
D1816, GOST 6581. It is a fully automatic device that allows testing to be performed according to the procedures specifed in these standards, as well as user procedures specifed in the
appropriate section of the setup menu.
GUIDE PS400
The Guide PS Series high-performance thermal camera is designed to make the inspection, maintenance and troubleshooting work easier, faster and more accurate.